Problems fitting Transit or Light Truck Wheels on

When you need to balance light truck wheels you will find that the standard cone set you have for your car wheel balancer is probably too small to fit the larger truck wheel correctly. 

You don’t have to buy a special truck wheel balancer machine but you will have to buy a special Transit/Light Truck cone that has been especially designed to enable the larger wheels to be balanced on a standard car wheel balancer. 

Many users just purchase the big cone and have no problems but often these cones on their own don’t give sufficient clearance   between the wheel and the balancer body and a spacer is required. This is why we always recommend you purchase a complete Transit cone and spacer set.

Our Equipment4garages.com Cone and Spacer set for mounting Light Truck Wheels on a standard car wheel balancer machine can be supplied to fit either a 28mm, 36mm, 38mm or 40mm Wheel Balancer Shaft. Cone Size: small end 115mm, large end 180mm. Complete with a Light Weight Spacer.

These is available to purchase on-line for only £180 plus Vat per set from the equipment4garages.com website or by phone, just call Richard on 01727 875695.