Attention Wheel Balancer Users!
<< Back to Wheel Balancers - Support and Advice<< Back
posted in Wheel Balancers - Support and Advice by Richard Wilson on 10:51 Nov 25th, 2019
Are you aware there is such a thing as a Van Wheel Kit, Light Commercial Kit, which is also known as Transit Cone Kit and Taxis Cone Kit, which enables you to balance Ford Transit, Ford Iveco, Taxi's and 4x4 wheels which have larger than average centre's.
Our Van Wheel Kits (also known as a Light Truck Cone Kit or a Light Commercial Kit) are suitable for most wheel balancers. They are available in 5 sizes to fit shafts with the following diameter's:
28mm / 36mm / 38mm / 40mm and 46mm
The kits comprise of a spacer and a double sided cone to extend the combinations of wheels the 'Van Wheel Kit' will suit.
For Corghi and Hofmann wheel balancers, a special kit has been developed as shown below...
.jpg){kind=spacer}
To enable you to understand the method of using a Van Wheel Kit there is a sequence of images below of how it should be used..jpg)
EAK02057G02A DDTBDEA08 280400058
